Nghệ Thuật Gấp Giấy_ Gấp 1 CHIẾC XE MÁY YZR_M1_ YAMAHA - P1

Thank you for downloading the "YZR-M1"paper craft model. By simply
following this manual while referring to the names and numbers shown
on the parts sheets, you can assemble an authentic-looking replica of
the YZR-M1.
Assembly instructions: Fourteen A4-sized sheets.
Paper craft: Eighteen A4-sized sheets with 114 parts in all
These instructions apply only to the "YZR-M1." These Paper Craft parts are
easier to work with when printed out on strong, thick paper (like postcard
stock).
In creating these Paper Craft models we use
110kg Kent paper stock
2006.4.17


1

Basic working method and markings

To begin

Tools and materials needed
-Ruler - scissors - blade cutter or "Exacto-knife" - awl or
other pointed tool (for making a folding crease) - felt pen

Solid lines

- pin set - glue - hand towel ( for cleaning your fingers) dictionary or other heavy book ( to press the papers flat).

Fold along these lines.
The printed surface should be
on the outside of the folded shape.

Items of Caution
*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size. There
may be differences in dimensions, depending on the
type of printer used.

2

Broken lines

Fold along these lines.
The printed surface should be
on the inside of the folded shape.

Dotted line

How to assemble

Cut along these lines.

*Follow the working method and markings carefully.
*Cut carefully along the outter line with cutting blade,
Exacto-knife or scissors.

One - point Advice

Do not fold or cut the parts
marked .

*Cut carefully with cutting blade, Exacto-knife or
scissors.
*For folding parts, first use an awl or other pointed
tool to make a light crease along the dotted or solid
line. This will make the folds straight. Avoid making
strong creases, as this will cause the paper to tear.

Cut out parts marked with an
asterisk(*).

*As an adhesive, white wood glue is recommended.
Avoid over application as this may cause the paper to
wrinkle.
*Before beginning assembly, test adhesive amounts
on extra paper.
*Occasionally, white spots will be apparent on folds
and cuts. Use a marker or pencil to fill in these spots.
It is recommended that this be done after each stage
of assembly because coloring becomes more difficult
once parts are assembled.

Red dots are the reference
positions for gluing surfaces.

2

1 Assembling the Front Cowl
First, assemble each component by following the
working method and markings. Then, refer to the
illustration and photos below to glue the parts together.

Indication of
Working Methods

Fold or Curve

Front Cowl

Fold each relevant part according to the assembly symbols.

Sheet A, 5 parts in total

Please use the

Glue

dots on each component as reference when gluing surfaces.

A-2

A-1

A-5

A-3

Reference photo

A-4

A-2

3


2 Assembling the Steering
First, assemble each component by following the
working method and markings. Then, refer to the
illustration and photos below to glue the parts together.

Indication of
Working Methods

Steering

Fold each relevant part according to the assembly symbols.

Sheet B, 18 parts in total

Please use the

Fold or Curve

Glue

dots on each component as reference when gluing surfaces.
B-1
B-2

B-4

[ Upper Steering Column ]
B-3
B-11

B-6
B-10

B-9

B-7
*DO NOT glue the upper and the lower parts

[ Lower Steering Column ]

of the steering column at this stage.
B-5
B-8
B-14
B-13

B-16
B-18

B-15

B-17

Reference photo

B-12

4


3 Assembling the Fuel Tank & Exhaust Pipes
First, assemble each component by following the
working method and markings. Then, refer to the
illustration and photos below to glue the parts together.

Indication of
Working Methods

Fold or Curve

Fuel Tank

Fold each relevant part according to the assembly symbols.

Sheet C, 2 parts in total

Please use the

Glue

dots on each component as reference when gluing surfaces.

C-2

Reference photo

C-1

Exhaust Pipes

Fold each relevant part according to the assembly symbols.

Sheet D, 6 parts in total

Please use the

dots on each component as reference when gluing surfaces.

D-4

D-5

D-6
D-1

D-3

Reference photo
D-2

5

4 Assembling the Rear Fender
First, assemble each component by following the
working method and markings. Then, refer to the
illustration and photos below to glue the parts together.

Indication of
Working Methods

Rear Fender

Fold each relevant part according to the assembly symbols.

Sheet E, 12 parts in total

Please use the

Fold or Curve

Glue

dots on each component as reference when gluing surfaces.

E-9

E-2

E-10
E-8

E-3

E-1

E-11

E-4
E-5
E-12
E-7

Reference photo

E-6

6


5 Assembling the Under Cowl
First, assemble each component by following the
working method and markings. Then, refer to the
illustration and photos below to glue the parts together.

Indication of
Working Methods

Fold or Curve

Under Cowl

Fold each relevant part according to the assembly symbols.

Sheet F, 10 parts in total

Please use the

Glue

dots on each component as reference when gluing surfaces.
F-4

F-5

F-7

F-2

F-3

F-6

F-10

F-9
F-8
F-1

Reference photo

7


6 Assembling the Frame
First, assemble each component by following the
working method and markings. Then, refer to the
illustration and photos below to glue the parts together.

Indication of
Working Methods

Fold or Curve

Frame

Fold each relevant part according to the assembly symbols.

Sheet G, 21 parts in total

Please use the

Glue

dots on each component as reference when gluing surfaces.

G-2

G-1

G-13

G-4

G-8

G-6

G-10

G-15

G-7

G-17
G-9

G-14
G-16

G-11

G-5
G-12

G-18

G-20

G-3

G-21

G-19

Reference photo

8


7 Assembling the Rear Arm
First, assemble each component by following the
working method and markings. Then, refer to the
illustration and photos below to glue the parts together.

Indication of
Working Methods

Fold or Curve

Rear Arm

Fold each relevant part according to the assembly symbols.

Sheet H, 13 parts in total

Please use the

Glue

dots on each component as reference when gluing surfaces.

H-2

H-5

H-11

H-6

H-13
H-1
H-12
H-4

H-10
H-3
*Do not glue Parts H-3 to H-4
at this stage.
H-9

H-8

H-7

Reference photo

9


8 Assembling the Front Tire
First, assemble each component by following the

working method and markings. Then, refer to the
illustration and photos below to glue the parts together.

Indication of
Working Methods

Front Tire

Fold each relevant part according to the assembly symbols.

Sheet I, 14 parts in total

Please use the

Fold or Curve

Glue

dots on each component as reference when gluing surfaces.

*Glue the completed front wheel to the assembled front tire.

I-12
Front Tire

I-14

I-5

I-13

I-11
I-4

Front wheel

I-6

I-7
I-3
I-2

Reference photo
I-10

I-9
I-8
I-1

10


9 Assembling the Rear Tire
First, assemble each component by following the
working method and markings. Then, refer to the
illustration and photos below to glue the parts together.

Indication of
Working Methods

Rear Tire

Fold each relevant part according to the assembly symbols.

Sheet J, 12 parts in total

Please use the

Fold or Curve

Glue

dots on each component as reference when gluing surfaces.

*Glue the completed rear wheel to the assembled rear tire.

J-10
J-12

Rear Tire

J-3

J-11

J-9
J-2

J-4
Rear wheel

J-5
J-1

Reference photo
J-8

J-6

J-7

11


10 Finish
Please use the

Frame

dots on each component as reference when gluing surfaces.

Assembly Instructions

Fuel Tank
Rear Fender

Upper Steering Column

glue the assembled parts in numerical
order

1
2
3
4
5
6
7
8
9

1

through 12 .

Glue the Rear Tire to the Rear Arm.

5

Front Cowl

9

Glue the Rear Arm to the Frame.
Glue H-3 to H-4.

Exhaust Pipes

12

6

10

Glue H-3 to the Frame.

5

H-4

Glue the Rear Fender to the Fuel Tank.

12

Glue the Fuel Tank to the Frame.

3

10

Glue the Under Cowl to the Front Cowl.

2

Glue the Under Cowl to the Frame.

1

Glue the upper part of the Steering to the Frame.

10 Glue the lower part of the Steering to the upper part of the Steering and the Frame.

11 Glue the Front Tire to the lower part of the Steering.

7

Lower Steering Column

8

Rear Tire

4

12 Finish by gluing the Exhaust to the Rear Arm and the Rear Fender.

Rear Arm

H-3

11

Front Tire
Under Cowl

12


11 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.

RIGHT

Rear Fender

Fuel Tank

Front Cowl

E-1

E-6

E-11

C-1

A-1

E-2

E-7

E-12

C-2

A-2

E-3

E-8

A-3

E-4

E-9

A-4

E-5

E-10

A-5

FRONT

Exhaust Pipes

Steering

D-1

B-1

B-6

B-11 B-16

I-1

I-6

I-11

D-2

B-2

B-7

B-12 B-17

I-2

I-7

I-12

D-3

B-3

B-8

B-13 B-18

I-3

I-8

I-13

D-4

B-4

B-9

B-14

I-4

I-9

I-14

D-5

B-5

B-10 B-15

I-5

I-10

D-6

13

Front Tire


12 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.

LEFT

Frame
G-1

G-6

G-11 G-16 G-21

G-2

G-7

G-12 G-17

G-3

G-8

G-13 G-18

G-4

G-9

G-14 G-19

G-5

G-10 G-15 G-20

REAR

Under Cowl

Rear Arm

F-1

F-6

H-1

H-6

H-11

J-1

J-6

J-11

F-2

F-7

H-2

H-7

H-12

J-2

J-7

J-12

F-3

F-8

H-3

H-8

H-13

J-3

J-8

F-4

F-9

H-4

H-9

J-4

J-9

F-5

F-10

H-5

H-10

J-5

J-10

Rear Tire

14