Ethernet Test Access Panel Non-Invasive Testing and Monitoring

SPEC SHEET
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Ethernet Test Access Panel
Non-Invasive Testing and Monitoring
ADC’s new Ethernet Test Access Panel is the first of its kind for non-invasive testing
and monitoring of Ethernet signals up to and including Gigabit Ethernet.
ADC is the leader in providing test access solutions for telecommunications networks
such as Digital Signal Cross-Connect Systems (DSX). We now bring this expertise to
Ethernet-based Packet networks through our Ethernet Test Access Panel. As Carrier
and Enterprise networks deploy critical data services, such as Ethernet service delivery
and data centers, the need to provide non-invasive points for testing and monitoring
becomes a critical element of network design. ADC’s solution features standard RJ45
interfaces in a 24-port two-rack space high patch panel with a Make-Before-Break
(MBB) connector in-line with the Ethernet circuit. A number of value added modules
can be inserted into the MBB connector including a “look both ways” test access cord
with a standard RJ45 output that can be plugged into any standard Ethernet test set
or Intrusion Detection System (IDS).
Features:
• High Density 24 Ports in two rack spaces
• Standard RJ45 patch panel interface
• Standard RJ45 test access cord attaches to any Ethernet test system
• Make-Before-Break connector allows Ethernet circuit to be accessed, re-routed,
protected, or monitored without disrupting existing cabling
• Category 5e performance
Applications
• Test and turn up of new Ethernet services
• Performance monitoring of existing Ethernet lines
• Intrusion Detection Systems (IDS)
• 10/100Base-T Ethernet
• Gigabit Ethernet (1000Base-T)
• T1/E1

ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you
may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications,
Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or
features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
1300579 8/04 Original © 2004 ADC Telecommunications, Inc. All Rights Reserved
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
SPEC SHEET
Description
24 Port RJ45 to RJ45 Test Access Panel, 2 Rack Units
24 Port RJ45 to RJ45 Test Access Panel, All Front Access, 2 Rack Units
Ethernet Test Access Cord
Catalog Number
ADCPP24-DRJ
ADCPP24-DFRJ
ADCDM-TEST
Ordering Information
UL, cUL, CE, EN 60950
0 to 40 degrees C
-20 to 70 degrees C
EIA/TIA-568-B Category 5e, ISO 11801 Class D
10Base-T, 100Base-TX, 1000Base-T, E1, T1
RJ45
RJ45 (ADCPP24DFRJ is all front access, i.e. inputs and outputs are on
front of panel only.)
Make-Before-Break, Front Access
Dual RJ45 Plugs, T568B Wired

3.5” x 17.2” x 3”
4.6 lbs
Reversible 19”, 23”, Wall Mount, or Recessed 19” Mount, WECO or EIA
500 Cycles
Safety:
Operating Temperature:
Storage Temperature:
Performance:
Applications Supported:
Front Interface:
Rear Interface:
Test Access Port Interface:
Test Access Cord Interface:
Dimensions:
Weight:
Rack Mounting:
Test Access Port Life Cycle:
Specifications