ISO 26986:2010Amd 1:2022 Resilient floor coverings — Expanded (cushioned) poly(vinyl chloride) floor covering — Specification — Amendment 1

INTERNATIONAL ISO
STANDARD 26986

First edition
2010-09-01
AMENDMENT 1

2022-09

Resilient floor coverings — Expanded
(cushioned) poly(vinyl chloride) floor
covering — Specification

AMENDMENT 1

Revêtements de sol résilients — Revêtements de sol amortis à base de
poly(chlorure de vinyle) expansé — Spécifications
AMENDEMENT 1

Reference number
ISO 26986:2010/Amd.1:2022(E)

© ISO 2022

ISO 26986:2010/Amd.1:2022(E)

COPYRIGHT PROTECTED DOCUMENT

© ISO 2022

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.

ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email:
Website: www.iso.org

Published in Switzerland

ii  © ISO 2022 – All rights reserved



ISO 26986:2010/Amd.1:2022(E)

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 219, Floor coverings, in collaboration with
the European Committee for Standardization (CEN) Technical Committee CEN/TC 134, Resilient and
textile floor coverings, in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).

Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

© ISO 2022 – All rights reserved  iii


ISO 26986:2010/Amd.1:2022(E)

Resilient floor coverings — Expanded (cushioned)
poly(vinyl chloride) floor covering — Specification

AMENDMENT 1

Normative references
Delete footnote 1).
Replace the reference to ISO/TR 4918 with ISO 4918.
Replace the reference to EN 424 with the following:

ISO 16581, Determination of the effect of simulated movement of a furniture leg

Clause 4, Table 1

Add the following footnote a) after the reference to ISO 105-B02:

a) Test until blue wool scale No. 6 according to ISO 105-B02. Compare this sample with a reference
sample which was stored in the dark.

4.1, Table 2
Delete the row referring to "Class22+" from the table.
Replace the reference to EN 424 with ISO 16581.

Clause 5
Replace the reference to ISO 26986:2010 with ISO 26986.

Annex A
Delete “:2010” from the reference to ISO 9239-1 and ISO 11925-2.
Delete the 8th bullet point.

Bibliography

Delete the following references from the bibliography:
EN 653, Resilient floor coverings — Expanded (cushioned) polyvinyl chloride floor covering —
Specification

ASTM E645, Standard Test Method for Efficacy of Microbicides Used in Cooling Water Systems
Delete “-9” from the reference to ASTM E648-9.

© ISO 2022 – All rights reserved  1

ISO 26986:2010/Amd.1:2022(E)